This poker gauge is used to measure the propeller shaft drop. Additional, make sure to turn the blade to one position refer to the marking. Normally, we take top measurement and bottom measurement. All measurements will be taken according to IACS standards.
The Poker gauge is inserted to in this access point to measure the propeller drop. The poker gauge is a special instrument which is kept with the chief engineer, and the reading is usually taken every dry dock. The design of the poker gauge may vary as each vessel has customised poker gauge made available during the handing over from the shipyard.
The poker gauge supplied when the vessel is new should always been used. This is normally supplied in a box, with the critical dimensions recorded inside. The actual distance measured is less important than the change in distance. This can only be determined acurately by using the same tool everytime.
Memorize These 5 Poker Ranges. To make your life easier, here are 5 preflop poker ranges that you need to memorize. They are often the starting point to estimating ranges on the fly and will help you gauge how many hands (and what kind of hands) relate to different frequencies. 2.5%: QQ+/AK; 5%: TT+/AQ+ ; 10%: 44+/AJ+/KQ/KJs; 20%: 22+/ATB/54s+
This poker gauge is use to measure the propeller shaft drop (known as propeller wear down). After dismantling the rope guard, make sure to turn the blade to one position refer to the marking. Normally, we take top measurement and bottom measurement. The poker gauge is placed between the last and second last stern tube seals (aft- near the propeller). the reading is
See more videos for Poker Gauge
Poker Gauge is €10. Players must wager the bonus amount 45 times prior to making any withdrawals. Game weighting rules apply. Country restrictions apply. 18+, New Players Only. Play Responsibly - Wagering Poker Gauge Requirements
This propeller drop is measured using poker gauge. >Usual propeller drop = 1mm/160mm shaft dia >Water cooled bearing clearance = 8mm. >Oil cooled bearing clearance = 2mm. Propeller drop Measurement Procedure > The poker gauge is placed between the last and second last stern tube seals (aft- near the propeller).
With most modem stem tube seal designs, the poker gauge measures from the seal box “OD” to the seal sleeve “OD”. Hence, whenever the seal is fitted with a new sleeve or the sleeve is machined, the poker gauge readings “as fitted” should be recorded in conjunction with the measured clearance, by feeler gauges, calibration or both, since the bearing will be accessible during seal overhaul.